Description
FAQ
Review
Description
1.Product features：
This product is a two-component one. 3-5 minutes curing, high hardness and strength after curing.
2.Application scope
It is used to repair the sand hole of the pipeline, the corrosion perforation position, the leakage part of the cylinder block, etc. Easy and fast to use.
3.Construction process:
·Surface treatment: the surface stains and oil stains must be removed. If the parts with high strength requirements are required, the surface must be polished and cleaned;
· Mixing: cut a section as needed and mix it by hand. The color is uniform and black.
·Coating: press the glue into the gap and hole leakage, cover the surrounding area, and apply a certain pressure until the colloid heats up.
· Curing: when the temperature is lower than 10 ℃, heating measures shall be taken. After curing at room temperature for 1-2 hours, heat the repaired part with a heat source. The temperature shall not exceed 80 ℃ for 3-4 hours. When heating, the heat source shall not directly contact the repaired part, and shall be irradiated 300-400mm away from the surface. Small volume workpieces can be heated in the oven as a whole, and the temperature shall not exceed 80 ℃. (heat source: infrared lamp, electric furnace, or other heat source, but not heated by open fire)
· Post processing: after curing for a certain time, it can be processed by ordinary processing methods. Machining can be carried out after 6 o'clock.
4.Matters needing attention:
·When the mixing volume is large and the temperature is high, the construction time shall be reasonably arranged;
· Avoid construction in the environment where the temperature is lower than 5 ℃ and the humidity is greater than 90%;
·When using, keep the working environment ventilated. Before curing, avoid the glue from contacting the eyes and skin. If it is accidentally touched, wash it with a large amount of water and send it to a doctor if it is serious.
·Store at room temperature, cool and ventilated.
This product is a two-component one. 3-5 minutes curing, high hardness and strength after curing.
2.Application scope
It is used to repair the sand hole of the pipeline, the corrosion perforation position, the leakage part of the cylinder block, etc. Easy and fast to use.
3.Construction process:
·Surface treatment: the surface stains and oil stains must be removed. If the parts with high strength requirements are required, the surface must be polished and cleaned;
· Mixing: cut a section as needed and mix it by hand. The color is uniform and black.
·Coating: press the glue into the gap and hole leakage, cover the surrounding area, and apply a certain pressure until the colloid heats up.
· Curing: when the temperature is lower than 10 ℃, heating measures shall be taken. After curing at room temperature for 1-2 hours, heat the repaired part with a heat source. The temperature shall not exceed 80 ℃ for 3-4 hours. When heating, the heat source shall not directly contact the repaired part, and shall be irradiated 300-400mm away from the surface. Small volume workpieces can be heated in the oven as a whole, and the temperature shall not exceed 80 ℃. (heat source: infrared lamp, electric furnace, or other heat source, but not heated by open fire)
· Post processing: after curing for a certain time, it can be processed by ordinary processing methods. Machining can be carried out after 6 o'clock.
4.Matters needing attention:
·When the mixing volume is large and the temperature is high, the construction time shall be reasonably arranged;
· Avoid construction in the environment where the temperature is lower than 5 ℃ and the humidity is greater than 90%;
·When using, keep the working environment ventilated. Before curing, avoid the glue from contacting the eyes and skin. If it is accidentally touched, wash it with a large amount of water and send it to a doctor if it is serious.
·Store at room temperature, cool and ventilated.
FAQ
Q
Can we use our own brand label?
A
Yes. You can private label all of the products we are selling.
Q
Can we order small quantity?
A
Yes. We have orders from different customers and we combine into a big order to our factories, big enough for them to manufacture with good price.
Q
Why can't I see the price?
A
Prices are offered only to registered users. However, we can't offer price of some products online for different reasons. Please send us inquiries if you can't find the price after logging in by clicking "Add to inquiry".
Q
Are you authorized distributor of MRO brands?
A
For some brands, yes. And some brands not as direct authrized distributor. We only purchase goods from authorized distributor if we are not the authorized one.
Review
Review
Send your message to us
